Transportkosten
Equipment package
· 1 skimmer, incl. filter cartridge and skimmer basket
· 1 inlet jet 105, R 1 ½"" 4 x 8 mm, V4A
· 1 winter plug for inlet jet 105 (delivered separately)
· 1 safety overflow fitting WP 133
· 1 underwater light LED warm white
· 1 transformer 100 VA and 1 deck box (delivered separately)
surface care set
Consisting of:
1 each of Pool Finish, Gel Edge Cleaner, Antigilb,
stainless steel polish, gloves, microfibre cloth polishing cloth, polishing set, sponge, care instructions for swimming pools (Technical Info SB 9)
4 x each 1000-, 2000-grit wet sandpaper and 800-grit sandpaper
water care set HTH
1 x Lovibond pool tester
1 x HTH pH-Plus 5 kg
1 x HTH Briquettes 7 g, 2.5 kg inorganic UN-1748,
Calcium hypochlorite, mixture, dry, 5.1, III, (E),
1 x HTH - pH Minus 5 kg
1 x HTH - Alkanal 5 kg
1 x Chlorine doser "Swim"
Heat pump HKR 6 kW
For the heating of your C-SIDE
Weight: approx. 36 kg
Hydraulic connection adhesive screw connection d 50
Performance data:
Heat output A 15°/W 26°= 4,25kW
Heating capacity A 26°/W 26° = 6 kW
Cooling capacity approx. 4kW
Power consumption approx. 1.04 kW
Current consumption nominal 5A, fuse 16A C (slow blow)
Water flow rate > 2,3m³
Pressure loss heat exchanger kPa=2,4
Volume level in 10/1 mtr. approx. 38/50 dB(A)
Functionality starting at an outdoor temperature of 10 degrees.
4 x vertical inlets
- including 4x winter plugs, 28/35 x 35 mm
Insulation
Energy conservation through jointless thermal insulation
Technical package for half-year use
Technical equipment with filter pump and bypass for a heat pump
· Self-priming filter pump 0.75 kW-230 V
· Bypass for an optional heat pump
· Filter pump control mounted
· Connected load: 1 x 16 Ampere - 230 V
· Size 120 cm x 80 cm (length x width)
This technical package can be used from spring to autumn. The pool is heated by an optional heat pump. When the outside temperature is above 10°C , the water can be heated up to 28°C.
The distance between pool and equipment should not exceed 5 m.
CSide Pooldeck (without cladding)
Complete aluminium system incl. drainage level,
stainless steel roller with double ball bearing,
rails to be laid on or milled in the floor,
cover angle with brush seal, plug-in connector and installation material
Payload 1.8 kN/m²
Snow load 1.5 kN/m²
Assembly on site, assembly material is supplied
Delivery with the pool
Spare cartridge
Above ground electrical slatted cover
anthracite
Slats not included
Aufpreis Oberflur-Sitzbankabdeckung
anthracite
*Nicht nachträglich erhältlich*
Roller cover
Safety cover with roll-up gear
· colour: grey ( RAL 7037 )
Winter debris cover
Woven net to protect against foliage and coarse contaminants
The cover protects against coarse impurities
Mounting instructions:
The cover is supplied with a double stitched wraparound. Eyelets are inserted at the edge at a distance of 50cm. The net cover is secured in retractable stainless steel floor anchors by means of elastic bands.
Insulating floating cover, 5 mm foam
colour: grey
Hardtop cover
beigegrau
Coping stones granite, grey
for CS 37
Dimensions: 60x60x6/3, mottled surface
Piping material
for connecting the pool and technical shaft or heat pump
4 x reduction, 90°, 50 f/m
4 x elbow, 90° 2 x socket, 50 x 50 f/m
1 x Tangit cleaner 125 ml
1 x Griffon PVC glue WDF-05
Electric vacuum cleaner
with submersible pump and telescopic rod
Manual vacuum cleaner
PVC blue
Total length: 148 cm
Colour: PVC-blue
Suction width: 8 cm
Hardtop cover
anthracite
Hardtop cover
light grey
Roller shutter slats, PVC
PVC grey
Roller shutter slats, polycarbonate
polycarbonate solar version
Surcharge for fixed date (day) delivery
Delivery to the dealer
Surcharge for delivery by a curtainsider
crane unloading on site
Choose stairs:
CSIDE Classic
One-piece pool made of epoxy-acrylate, 6° wall incline with integrated steel frame, floor in sandwich construction with 3 cm insulation.
2.1 m
CSIDE Style
The "bestseller" equipment to an attractive price. Choose a CSIDE Style! Please note that the preconfigurated equipment can not be changed. For individuall equipped models choose: CSIDE Classic
2.1 m
CSIDE easy
The compact entry-level model (incl. preinstalled equipment package, 4 vertical inlet nozzles, techical pallet for half-ear use and piping material)
2.1 m
CSIDE special models
One-piece pool made of epoxy-acrylate, 6° wall incline with integrated steel frame, floor in sandwich construction with 3 cm insulation.
3.7 m
C-SIDE Fun & Relax
<p><strong>Der CSide für den aktiven Badespaß</strong></p> <p>Dieses Modell ist ideal für den aktiven Badenutzer. Mit dem vorinstallierten AquaFun 4.0, eine auf den CSide 47 abgestimmte Strömmungsanlage, können Sie sich fit halten. Der CSide 47 Fun & Relax eignet sich für Aqua Sport, Aqua Jogging oder auch für leichte Brustschwimmbewegungen. Durch die mitgelieferte Wärmepumpe kann der Badespaß früher beginnen und länger andauern. Genießen Sie die Abendatmosphäre mit unserer Ambiente Beleuchtung, in Kombination mit dem 4-fach Quelleinlauf.</p>
2.1 m
* incl. 0% VAT All illustrations include the equipment package and optional accessories. In the interest of technical progress, we reserve the right to make changes and improvements in production without prior notice. All offers are subject to change and non-binding. Prices without guarantee. The author expressly reserves the right to change, supplement or delete parts of the pages or the entire offer without separate announcement or to discontinue publication temporarily or permanently. Liability claims against the author, which refer to material or non-material damage, and which may be caused by the usage or non-usage of the information provided or, respectively, by the usage of any incorrect or incomplete information, are generally excluded. This disclaimer is to be regarded as part of the internet publication which you were referred from. If sections or individual terms of this statement are not legal or correct, the content or validity of the other parts remain uninfluenced by this fact.
